Publications

  1. Micro-Laser Assisted Machining: The Future of Manufacturing Ceramics and Semiconductors

    April 11, 2014   An International Journal on Sensors and Materials, Tokyo, Japan

  2. Single Point Diamond Turning of Silicon by Using Micro-Laser Assisted Machining Technique

    June 9, 2014   Proceedings of the ASME 2014 International Manufacturing Science and Engineering Conference, Detroit, MI, USA

  3. An Experimental Study on Single Point Diamond Turning of an Unpolished Silicon Wafer via Micro Laser Assisted Machining

    September 1, 2014   Advanced Materials Research, Vol. 1017, pp. 175-180

  4. The Effect of Thermal Softening on the Ductile Response of Sapphire

    September 9, 2014   Advanced Laser Applications Conference, Chicago, Illinois

  5. Single Point Diamond Turning of Silicon with the Micro-LAM Process

    September 8, 2014   Advanced Laser Applications Conference, Chicago, Illinois

  6. Micro-Laser Assisted Single Point Diamond Turning Feasibility Tests of Single Crystal Silicon

    October 18, 2013   American Society for Precision Engineers (ASPE) 28th Annual Meeting, St. Paul, Minnesota

  7. Micro-Laser Assisted Feasibility Test on Soda-Lime Glass

    May 8, 2013   Journal of the American Society of Mechanical Engineers – Thermal Assisted Manufacturing

  8. The Enhanced Ductility and Reduced Brittleness from Micro-Laser Assisted Machining

    August 22, 2013   Advance Laser Applications Conference and Exposition, Chicago, Illinois, USA

  9. Micro-Laser Assisted Machining: The Future of Manufacturing Ceramics and Semiconductors

    April 11, 2014   An International Journal on Sensors and Materials, Tokyo, Japan

  10. Custom Cooling Stage to Eliminate Thermal Expansion of Spindle during Micro-Laser Assisted Machining

    August 22, 2013   Advance Laser Applications Conference and Exposition, Chicago, Illinois, USA

  11. First Study on Micro-Laser Assisted Scratch Tests of ZnSe

    April 11, 2014   An International Journal on Sensors and Materials, Tokyo, Japan

  12. Micro-Laser Assisted Machining: The Future of Manufacturing Ceramics and Semiconductors

    August 22, 2013   Advance Laser Applications Conference and Exposition, Chicago, Illinois, USA

  13. Micro-Laser Assisted Feasibility Test on Soda-Lime Glass.

    June 10, 2013   Proceedings of the ASME 2013 International Manufacturing Science and Engineering Conference, Madison, Wisconsin, USA

  14. The Effect of Thermal Softening on the Ductile-to-Brittle Transition of Sapphire

    June 10, 2013   North American Manufacturing Research Conference (NAMRC), Madison, Wisconsin, USA

  15. Micro-Laser Assisted Material Removal of Ceramics & Semiconductors

    August 25, 2012   Advance Laser Applications Conference and Exposition, Chicago, Illinois, USA

  16. Effect of Applied Load, Cutting Speed and Laser Power on the Material Deformation and Removal of Semiconductors

    June 4, 2012   Proceedings of the 40th North American Manufacturing Research Conference (NAMRC 40), Indiana, USA

  17. Studying the Temperature Effect during the High-Pressure Phase Transformation of Silicon via Indentations

    June 4, 2012   Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference, Indiana, USA

  18. Pressure and Temperature Effects in Silicon during Indentation Tests

    March 12, 2012   Paper #18, The 7th International Conference on Micro-Manufacturing (ICOMM), Illinois, USA

  19. Ductile Mode Machining of Ceramics and Semiconductors

    December 5, 2011   Ph.D. Dissertation, Western Michigan University, UMI ProQuest, Publication # 3496371

  20. Hybrid Laser Ablation-Single Point Diamond Turning Machining Process for CVD-Silicon Carbide Ceramics

    March 29, 2012   Paper #18, Int. J. of Manufacturing Research, 2013 Vol.8, No.3, pp.227 - 249

  21. Pressure and Temperature Effects in Silicon during Indentation Tests

    March 12, 2012   Paper #18, The 7th International Conference on Micro-Manufacturing (ICOMM), Illinois, USA

  22. Ductile Mode Machining of Ceramics and Semiconductors

    December 5, 2011   Ph.D. Dissertation, Western Michigan University, UMI ProQuest, Publication # 3496371

  23. Hybrid Laser Ablation-Single Point Diamond Turning Machining Process for CVD-Silicon Carbide Ceramics

    March 29, 2012   Int. J. of Manufacturing Research, 2013 Vol.8, No.3, pp.227 - 249

  24. Ductile Mode Material Removal and High-Pressure Phase Transformation in Silicon during Micro-Laser Assisted Machining

    December 3, 2011   Journal of Precision Engineering (ASPE), Vol. 36, Issue 2, pp. 364-367

  25. Ductile Regime Single Point Diamond Turning of Quartz Resulting in an Improved and Damage-Free Surface

    November 3, 2011   Journal of Machining Science and Technology, Vol. 15, No. 4, pp. 357-375

  26. Ductile Mode Micro Laser Assisted Machining of Silicon Carbide

    April 4, 2011   Chapter, Book Title: Properties and Applications of Silicon Carbide, Chapter 1, Intech Publishers, 2011, pp. 505-535 (ISBN: 978-953-307-201-2)

  27. Ductile Regime Material Removal of Silicon Carbide

    September 3, 2011   Book Chapter, Book Title: Silicon Carbide: New Materials, Production and Applications, Chapter 4, NOVA Publishers

  28. The Effects of Laser Heating on the Material Removal Process in Si and SiC Nanomachining

    January 30, 2011   Proceedings of 2011 NSF Engineering Research and Innovation Conference, Georgia, Atlanta, USA

  29. The Effects of Laser Heating on the Ductile to Brittle Transition of Silicon Carbide

    October 30, 2010   American Society for Precision Engineers (ASPE) 25th Annual Meeting, Atlanta, Georgia

  30. Ductile Regime Single Point Diamond Turning of Quartz

    October 10, 2010   Advances in Materials Processing Technology (AMPT), Paris, France

  31. Force analysis, mechanical energy and laser heating evaluation of scratch tests on silicon carbide(4H-SiC) In micro-laser assisted machining (µ-LAM) process

    October 5, 2009   ASME MSEC2009, West Lafayette, IN

  32. The Effect of Laser Heating on the Ductile to Brittle Transition of Silicon

    April 5, 2010   The 5th International Conference on Micro-Manufacturing (ICOMM/4M), Wisconsin, USA

  33. Micro-Laser Assisted Machining (µ-LAM):Scratch tests on 4H-SiC

    June 22, 2009   NSF CMMI Engineering Research and Innovation Conference, Honolulu, HI

  34. Single Point Diamond Turning Effects on Surface Quality and Subsurface Damage in Ceramics

    April 11, 2009   Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference, Indiana, USA

  35. Ductile Regime Single Point Diamond Turning of CVD-SiC Resulting in an Improved and Damage-Free Surface

    June 17, 2009   4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium on Materials & Processing, Penang, Malaysia

  36. Pressure and Temperature Effects in Micro-Laser Assisted Machining (µ-LAM) of Silicon Carbide

    April 9, 2009   North American Manufacturing Research Conference (NAMRC), USA, 2009

  37. Scratch Tests on 4H-SiC Using Micro Laser Assisted Machining (μ-LAM) System

    August 13, 2009   Advance Laser Applications Conference and Exposition, San Jose, California, USA

  38. Improving the Surface Roughness of a CVD coated SiC Disk by Performing Ductile Regime Single Point Diamond Turning(Link)

    October 7, 2008   ASME-MSEC, Chicago, Illinois

  39. A Manufacturing Process to Improve the Surface Roughness of a CVD Coated SiC Disk by Performing Ductile Regime Single Point Diamond Turning

    April 16, 2008   International Conference on Agile Manufacturing, Michigan

  40. Ductile to Brittle Transition of a Single Crystal 4H- SiC Wafer by Performing Nanometric Machining

    September 26, 2007   ISAAT, Precession Grinding and Abrasive Technology at SME International Grinding Conference